Find Ball Screw Support Bearing, Abba Ball Screw, Support Bearing on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Taper lock bushing 2012 for taper hole pulley
Home > Products > Taper Lock Bushing > Taper lock bushing 2012 for taper hole pulley

Taper lock bushing 2012 for taper hole pulley

    Packaging: Carton box + Wooden case
    Brand: HRSY
    Place of Origin: Tianjin, China (Mainland)

Basic Info

Model No.: 2012

Product Description

Taper Lock Bushing 2012 for taper hole Pulley  ,   -------------------------- HRSY taper bushs detailed data -------------------------     Install & Remove ----------------------------- HOW TO INSTALL AND REMOVE -------------------------- >> INSTALL 1) Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer of dirt. Place bush in hub and match half holes to make comelete holes(each comeplete hole will be threaded on one side only). 2) Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side. 3) Make sure bush is free in hub. Slip assembly onto shaft and locate in the desired position. 4) Tighten screws alternately and evenly until all are pulled up tightly(See table for torque settings)). 5) Hammer agsinst large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. Repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.   >>REMOVE 1) Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws. 2) Insert screws into removel holes that are threaded on the bush side. In sizes where washers are found under screws heads, be sure to use these washers. 3) Tighten screws alternately until bush is loosened in hub and then remove the coplete assembly. If bush does not loosen immediately tap on hub. Detailed Images   Company information Our mission is to bring you the high precision and high quality taper bushing.  We can manufacture metric and inch taper bush for you.oem service also available upon request.  We are confident that we will be able to provide the products and services you need and want.  We'd love to hear from you...   --------------------------------- PAYMENT AND SHIPMENT -----------------------------   Contact informaion ----------------------------------------- PLEASE CONTACT US                                                                                  TO GET FURTHER INFORMATION ------------------------------------------    

Contact us if you need more details on Taper Lock Bushing 2012. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Taper Lock Bush 2012、Taper Bushing 2012. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Taper Lock Bushing

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters