Pulley for Belt Conveyor
|Terms of Trade:||FOB,CFR,CIF,EXW,FCA|
|Delivery Time:||45 Days|
|Place of Origin:||Jiangsu China|
Model No.: QCP
Our engineers have been designing pulleys for over 40 years, and we have supplied pulleys to some of Australia`s largest companies including Rio Tinto and BHP.
At Quantum, we utilize Finite Element Analysis software to ensure our pulleys meet the most stringent design criteria. Coupled with our experience fabrication and quality control, we can ensure our pulleys can meet your demands. Our pulleys can be designed using locking elements, fully welded hubs, and many other options to suit your application. From Ø250mm to over Ø1.5m and over 2m wide, we can design and supply drive, tail, bend and wing pulleys to suit your requirements.
Whether it is for breakdown replacement, inventory spares or to be incorporated into new equipment, Quantum has the solution for you.
1) - Drive Pulley and Tail Pulley
Drive/Tail pulley is mechanical device used to change the direction of the belt in a conveyor system, to drive the belt, and to tension the belt. These pulleys can be divided into three categories: light duty, medium duty and heavy duty.
Bearing Dia: 80~100mm.
The shaft and the hub are connected by the single key.
Bearing Dia: 120~180mm.
The shaft and the hub are connected by lock rings
Bearing Dia: 200~250mm.
The shaft and the hub are connected by lock rings.
The tail pulley surface can be smooth steel, herringbone or diamond rubber lagging. Lagging offers increased belt traction and reduce wear on the pulley.
- Smooth Steel Pulley is suitable for the conveyor whose power requirement is small with narrow belt width.
- Herringbone rubber lagging has excellent friction factor, better anti-slippery and drainage ability.
- Diamond rubber lagging is available for two-way operating conveyors.
2) - Wing Pulley
wing pulley offers a self-cleaning design constructed with open voids that allow loose material to fall away from the contact surface
Wing Pulley is ideal for cleaning the bucket elevators belt in the boot. The intermittent belt contact made by the wings helps dislodge material as well as increases traction and reduces abrasion to the belt.
Quantum Conveying Systems is specialized in suppying conveying solutions and conveyor components manufacturing, with a combined experience of 40 years in bulk material handling. Quantum is born to be your ideal partner for the most cost-effective solutions in material conveying, with unique advantage of Australian outstanding design and competitive Chinese fabrication cost.
We design and make a range of reliable equipment that comes with an extended warranty on all parts and can be designed, installed and commissioned at any site across the world.
Our standard range of bulk materials handling and conveyor components include:
- Drag Chain Conveyor
- Bucket Elevators
- Screw Conveyors
- Modular Belt Conveyors
- Pulley and Idlers
- Lump Breakers & Pin Crushers
- Dilute and Dense Pneumatic Conveyors
- Silos & Storage
Our equipment solution and components are widely applied into following industries, but not limited to
- Mining and Resources
- Chemical and Industrial
- Cement and Quarrying
- Food and Beverage
- Waste and Recycling
Our equipment is designed to be trouble free and low maintenance whilst also ensuring that it can handle the toughest of materials. Power needs, shafts and bearings are all designed for surge capacities with high service factors ensuring maximum performance and life and minimum downtime.
Our equipment has been successfully installed in a wide range of applications and capacities, handling a wide range of throughput capacities, conveying at high temperatures, and handling materials that are high wear, abrasive, large lumpy, sticky non-flowing, as well as free flowing powders and granules.
Whether your application requires a heavy-duty high capacity machine or an industrial process machine for your factory, QUANTUM has the experience to supply the right equipment for your application: either from our standard ranges, or specifically designed for more specialized applications.
Our Workshop, located in Yangzhou City, China, has covered area of 20,000 square meter, including pulley & Idler production line, steelwork fabrication area, assembly, FAT and painting area, equipped with the following main facilities:
Overhead Crane up to 32 Tons CNC plasma cutting machine
CNC Bending Machine CNC Rolling Machine
CNC plate Shearing Machine Milling & Boring Machine
Idler Production Line
Blasting and painting facilities
Transport including semi-trailers and flat-bed trucks
Workshop: No.102,Central Avenue of Southern Economic New Area, Yangzhou City,China
Tel: +86 514 82065058
Quantum Australia – Engineering Centre
201/75 Tulip St, Cheltenham, Victoria, Australia 3192
Tel: +61 3 9585 6391
- Company Name: Quantum Conveying Systems Yangzhou Co.,Ltd.
- Representative: Wu Shaohua
- Product/Service: Chain Conveyor , Bucket Elevator , Screw Conveyor , Belt Conveyor , Industrial Mixer , Horizontal Belt Filter
- Capital (Million US $): RMB2,000,000
- Year Established: 2019
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): US$2.5 Million - US$5 Million
- No. of Production Lines: above 50
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: No.102, Central Road of Southern Industrial Area,Yangzhou City,Jiangsu
- Contact Person: Mr. Shaohua Wu
- Tel: 86-514-82065058
Premium Related Products