DC motor automatic Armature commutator lathe machine
Payment Type: | L/C,T/T |
---|---|
Incoterm: | FOB,CFR,CIF |
Min. Order: | 1 Set/Sets |
Delivery Time: | 45 Days |
Packaging: | wooden case package |
---|---|
Productivity: | 100sets |
Brand: | Nide |
Transportation: | Ocean,Land |
Place of Origin: | China |
Supply Ability: | 100 sets per year |
Certificate: | ISO |
Basic Info
Model No.: ND-LHL-QSFA3
Product Description
DC motor automatic Armature commutator lathe machine
ND-LHL-QSF armature commutator turning machine is suitable for turning commutator O.D. With advanced design, good shape and high performance, this machine adopts servo control for cutter moving and turning. Mechanical parts are imported abroad, thus the machine is of high efficiency and strong reliability.
Application and using range
Available range
a. Rotor OD
φ34mm~φ55mm( with automatic feeding device)
φ20mm~φ100mm (without automatic feeding device)
b. Output shaft length on commutator side
<100mm (with automatic feeding device)
<250mm (without automatic feeding device)
c. Shaft Diameter φ3mm~φ25mm
d. Commutator OD φ4.3mm~φ40mm
e. Turning depth by single side Max 0.10mm
Technical Data:
Concentricity | ≤0.0025-0.0035mm |
Roundness between bars | ≤0.0015-0.0025mm |
Armature diameter range | 20~85mm |
Surface roughness | ≤Ra0.40 |
Shaft length range | 32~200mm |
Armature shaft diameter range | 3~17mm |
Commutator O.D. range | 12~40mm |
Weight each cutting | Max 0.20mm |
Speed frequency range | 0~90Hz |
Control | PLC system |
Cutting speed | PLC adjustable |
Efficiency | Cycle≤10s per pc |
Air pressure | 4~6kg/cm2 |
Fixture | Diamond V block |
Motor Power | 2500W |
Frequency | 50/60Hz |
Weight | 1100Kg |
Voltage | AC220V±10% |
Machine dimension | 850mm*950 mm*1830mm |
Maintenance
1. Machine should be installed in a place, with clean air and moderate moisture.
2. Servo motor should be far away from oil, fluid etc and knocks by hard thing.
3. Key parts of machine`s mainframe is consisted of high precision dust-proof bearing and it needn`t do maintenance on general condition. But it requests replacement on condition that the bearing couldn`t rotate smoothly or in jam.
4. Inject 20# machinery oil to oil tank regularly.
5. Inject lubricant oil to Linear Guide rail regularly.
6. Tighten the screws and bolts regularly.
7. Avoid fierce knocking and pressing of touching display. Avoid fierce rotation of its box.
8. Keep the touching display and its box clean and keep it away from heavy dust, strong sunshine and corrosive material.
9. Keep machine away from high radiation equipment such as transformer.
Product Categories : Armature Manufacturing Machine > Commutator Turning Machine